Ubiquiti Unifi's Auto-VTI site to site VPN feature does not work when one of the firewalls (peers) terminating the VPN resides behind an existing NAT router or firewall. In this scenario, the easiest way to get a VPN running is to use the OpenVPN option. In this example, there are two sites to be connected: … Continue reading HOWTO: Ubiquiti Site to Site VPN – Double NAT
One of the nice features of the Ubiquiti Wireless system is the ability to turn off individual SSID's on a scheduled basis (at least with Unifi 5.9.29). An example use could be attaching the kids devices to an SSID which gets switched off at 10.30pm when it is time for bed. To enable schedules: Open … Continue reading Scheduled Wireless with Ubiquiti Access Points
This article has been updated - https://westwood.me.uk/2019/05/27/ubiquiti-site-to-site-vpn-double-nat/ Requirement: Two sites, each with a Ubiquiti USG appliance need to be connected by a Site to Site VPN. Assumptions: Both sites are already defined and managed by the same Cloudkey controller (version 22.214.171.124). Site A has a static public IP address. Site A has the internal subnet … Continue reading HOWTO: Ubiquiti USG, Site-to-site VPN and double NAT.